Control Command - Omron V750-BA50D04-SG-MY User Manual

3.1.5.5 Control Command

(1) Initialize setting (INIT)
This command initializes all setting of reader to the factory default setting. All settings shall be written into
the inner nonvolatile memories. After executing this INIT command, the reader requires reboot.
Command
Response
Example 1) All setting of reader is initialized to the factory default setting:
[Tx] INIT<LF>
[Rx] INIT0000<LF>
INIT<LF>
Note: No argument
INIT[RC]<LF>
[RC]: Response Code
87 of 135