Dhcp; Connect To Adsl By Pppoe Mode - Security Labs SLD 244 Owner's Manual

Four channel multiplexed

Hide thumbs Also See for SLD 244:

Table of Contents

9.4.3.2 DHCP

The "DHCP" is automatically set as the default network setting of the Network DVR.

When a Network DVR is connected into the LAN, it will issue DHCP packets to

request an IP address that is dynamically assigned by the DHCP server. If it is unable

to get a DHCP address on a limited tries, the Network DVR will assign a default IP

address such as "169.254.1.13".

To setup follow the steps below:

1. After setup, rebooting enables automatic connection to ADSL.

2. Enter the "Username" and "Password" fields with the account and password

provided by the ISP.

3. If item "Send mail after connected" is selected, the mail will be automatically sent

when connected to the ISP.

4. Click "OK" button to save the settings.

Note: In order to activate the function, it is necessary to reboot the device after the

setup.

If the Network DVR and ADSL modem are connected by a hub, the user can select

item "Dial On Power Up" to perform the connect operation. On contrary, if the

Network DVR and ADSL modem are connected directly, then please note the

following steps below:

ADSL Setting Display

Table of Contents