Table of Contents
Advertisement
4.
Press the« MENU» button to exit "HARD DRIVE SETUP" selection.
5. "HDD DRIVE SETUP"is located on the second menu layer. Under this menu
layer, the user may setup to "OVERWRITE" or "STOP".
When the item "OVERWRITE" has been selected, press the« ? » button to
6.
enable overwrite when the HDD is full (2 options: OVERWRITE or STOP).
7.
HDD SIZE: displays the capacity of the HDD.
8.
HDD USED: displays the capacity of the HDD already used.
? N/A indicates HDD not installed or unable to be detected.
8.8.1 FORMAT/ ERASE
PASSWORD INPUT ( 6) : ------
37
Advertisement
Table of Contents
