Operating Procedure; Power On; Monitoring Mode - Security Labs SLD 244 Owner's Manual

7. OPERATING PROCEDURE

7.1 Power On

After power on, DVR will auto-detect its peripherals (self-testing, auto detects the hard
disk, and the optional network connection.
The system will detect the video input and judge whether the video system is NTSC
or PAL. When video input is unable to be detected (VIDEO LOSS), the system will
send out an alarm, press any button to stop the alarm This alarm will not affect the
actual recording. If the DVR senses no video inputs, the DVR will stop recording.

7.2 Monitoring Mode

This mode is the default after power on. During this mode, the system supports live
view for monitoring. Press
Press button to start playback. Press
During playback, press
change the speed (FF1, FF2 or FF3), or press
To reset the system (while in quad or single display), press the« ? » button 5
??
times and the message« ALL SETTING DATA IS INITIALIZED.» will be displayed by
flashing 3 times. After reset the password will be set as default value (111111).
When the reset procedure has been completed, the message"DVR RESET
??
COMPLETED. TURN OFF AND ON THE DVR"will be displayed. Re-start the
DVR.
button, the system will enter the record mode.
button to enter the menu setup display.
button to return to the monitoring mode. Press
10
button to start reverse playback.
to