Exchanging The Settings Between Extensions; Walking Extension - Panasonic KX-NCP500 User Manual

1.12 Exchanging the Settings between Extensions

1.12.1 Walking Extension

You can exchange the settings set at another extension with your own settings. This allows you to use your
own settings, including your extension number, on another person's extension. Settings such as extension
number and One-touch Dialling memory are available at the new extension. It is also possible to exchange the
DSS Console settings along with the extension settings. Walking Extension is useful, for example, when you
move to a new location in the office.
This feature is also known as Walking Station.
To exchange your settings with another extension
PT/SLT
Off-hook.
extension PIN
Enter extension PIN
(max. 10 digits).
•
An extension personal identification number (PIN) is required to use this feature. Refer to
"
Number])" in "3.1.1 Customising Your Phone (Personal Programming)".
•
Your previous extension will receive the old settings of your new extension.
•
Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
•
If you are using a KX-NT300 series/KX-DT343/KX-DT346 telephone with a Bluetooth wireless
headset, and exchange the settings with another KX-NT300 series/KX-DT343/KX-DT346 tel-
ephone user, you cannot use your Bluetooth wireless headset at the other extension.
Bluetooth wireless headsets are registered on extensions themselves. Therefore, you have to
register a Bluetooth wireless headset on each desired extension. For details about registration,
refer to "Bluetooth Registration" in "3.1.2 Settings on the Programming Mode".
PIN: Personal Identification Number
7 2 7
727.
Enter
D.Tone
Assigning an Extension PIN to Your Extension (Extension PIN [Personal Identification
your
extension no.
Dial your extension
number.
On-hook.
1.12.1 Walking Extension
User Manual 167