Panasonic KX-NCP500 User Manual page 43

To check the left message and call back
PT/PS
While on-hook
MESSAGE
Press MESSAGE
until the desired
extension appears.
To call back
PT/SLT/PS
Press MESSAGE or enter
Off-hook.
To clear message waiting indications left on your extension
PT/SLT/PS
Enter
Off-hook.
•
The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
•
The display shows the messages starting with the most recent call.
•
At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then press
the soft button.
•
On your PT, you can establish one or more Message for Another Extension buttons. These
buttons can accept the message waiting notification of other extensions or various incoming
call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
•
A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
•
The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Message button or Message for Another Extension button.
Off-hook. Talk.
MESSAGE
OR
7 0
70 and then 2.
7 0
0
70. Enter 0.
1.2.4 When the Dialled Line is Busy or There is No Answer
2
Talk.
your
extension no.
Dial your
extension number.
C.Tone
On-hook.
User Manual 43