Assembly
Rock / Stone Application
1.
Place the island sections together on the ground.
Make sure the ground where the barbecue is place
2.
is as level as possible for best alignment.
NOTE: If the ground is not level, use shims to level out
the island sections. This needs to be done before you
place the bolts.
Page 4
Connect the speakers, lights, and main power cables
3.
before sliding the sections together.
Insert the bolts through the pre-drilled holes from the
4.
inside of the barbecue island (total of four bolts on
each side). Tighten all bolts using a 9/16" wrench.
5.
Prepare mortar in a container.
2008 Barbecue Island Owner's Manual
LTR20081036, Rev. A