Intsallation And Setup Of Maestro™ And Remote; Setting Up The Maestro - Casablanca Concert Breeze Owner's Manual

Step 5. Thread the fan pull chain through the pull
chain guide.
12
Fan Pull Chain
Pull Chain
Guide
Step 1. Plug the AC adaptor into the back of the
Maestro™ in the port labeled Power.
Step 2. Select the correct channel by sliding the
Step 5
switch to the desired channel.
Maestro™
Step 3. Plug a 3.5mm stereo cable into the back of
the Maestro™ in the port labeled line in.
Step 4. Plug the other end of the 3.5mm stereo
cable into your audio device.
Transmitted
Signal from
Maestro™
Step 5. Connect the speaker wire (not included)
to the speaker input terminals on the bottom of the
Sound
Maestro™. Make sure that the plus (+) and the minus
Emitted from
(-) signs on the Maestro™ correspond with the plus
Soundelier ®
(+) and the minus (-)signs on your audio device.
Products
Step 6. Make sure that all connections are firm.
NOTE: Contact between bare speaker wires at the
terminals can cause a short-circuit.
Do Not place Maestro™ in a place that is
damp or has high humidity.
Place Maestro™ at least 5' away from all
wireless devices.
C
onCert
INTSALLATION AND SETUP OF MAESTRO™ AND REMOTE

SETTING UP THE MAESTRO™

For Power Cable Installation:
AC Adaptor
For 3.5mm Stereo Cable Installation:
3.5mm Stereo
Cable
For Speaker Wire Installation:
B
reeze
Power
Port
3.5mm Channel
Port Switch
13