Remote Control - Casablanca M6006-01 Installation And Operation Manual

Remote Control

ON
Once the power
is turned on, the
remote must be
paired within 60
seconds. Pairing
is only required
once after initial
installation.
frequency matches a previously
installed remote transmitter. Install
A23 or MN21 alkaline battery in
the proper polarity and replace the
battery door. To pair the remote,
hold down the Set button for 5
seconds. Pairing is complete when
Battery
Door
ON ECE
1 2 3 4
Set
ON ECE
SET
1 2 3 4
Battery
Remove battery door. Change
the dip switch settings if the
LED button flashes twice.
M6006-01 • 02/12/16 • © Casablanca Fan Company
ON ECE
SET
1 2 3 4
(If a light kit is installed)
If a light kit is installed on your
fan, choose the light bulb mode
by moving the toggle switch.
Move the switch towards the "D"
for CFL bulbs and toward "ON"
for standard bulbs. Replace the
battery door.
15
www.CasablancaFanCo.com
To install the transmitter cradle,
hand-tighten the provided
screws to mount the cradle to
the wall.
1.888.227.2178