Remote Control - Casablanca stealth Manual

Remote Control

ON
Once the power
is turned on, the
remote must be
paired within 60
seconds. Pairing
is only required
once after initial
installation.
matches a previously installed remote
alkaline battery in the proper polarity
and replace the battery door. To pair
the remote, hold down the Set button
Battery
Door
ON ECE
1 2 3 4
Set
ON ECE
SET
1 2 3 4
Battery
Remove battery door. Change the
dip switch settings if the frequency
transmitter. Install A23 or MN21
for 5 seconds. Pairing is complete
when the small LED button on the
remote flashes twice.
M8524-01 • 04/29/14 • © Casablanca Fan Company
ON ECE
SET
1 2 3 4
If a light kit is installed on your
fan, choose the light bulb mode
by moving the toggle switch. For
LED light kits, set the switch to
"ON." Replace the battery door.
13 13
www.CasablancaFanCo.com
To install the transmitter
cradle, hand-tighten the
provided screws to mount the
cradle to the wall.
1.888.227.2178