Reset And Restore - D-Link DCS-2000 Manual

Reset and Restore

There is a button hidden in the pinhole beside the Ethernet socket. It is
used to reset the system or restore the factory default settings.
Sometimes resetting the system can make the system back to normal
state. If the system still has problems after reset, restore the factory
settings and install again:
RESET: Poke a paperclip or a small tool to click on
the button.
RESTORE: 1. Poke the tool to press on the button continuously.
2. Wait for self-diagnostic to run twice.
3. Withdraw the wrench as soon as the second self-
diagnostic starts.
Restoring the factory defaults will result
in the loss of any previous settings.
Reset or restore the system after power
on.
91
Reset button.