How To Ping Your Ip Address - D-Link DCS-2000 Manual

Q: The images is of poor quality, how can I improve the image quality?
A1: Make sure that your computers display properties are set to at least 15-
bit color. Using 16 or 256 colors on your computer will produce dithering
artifacts in the image, making the image look as if it has bad quality.
A2: The configuration on the Internet Camera image display is incorrect. Through
the Configuration section of the web management you need to adjust the image
related parameter for improve images such as brightness, contrast, hue and
light frequency. Please refer to the Configuration section for detail information.

How to PING Your IP Address

The PING (Packet Internet Groper) command can determine whether a specific
IP address is accessible by sending a packet to the specific address and waiting
for a reply. It can also provide a very useful tool to confirm if the IP address
conflicts with Internet Camera over the network.
Follow the step-by-step procedure below to utilize the PING command but first
you must disconnect Internet Camera from the network.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet Camera.
The replies, as illustrated below, will provide an explanation to the prob
90