D-Link DCS-2000 Manual page 49

Hide thumbs Also See for DCS-2000:

Table of Contents

Reserved space –

Indicates how many bytes should be reserved on the hard

disk. If the recording data exceed disk capacity, the new video data will replace

the oldest data.

Modulation Mode –

For selecting the input signal format (NTSC or PAL).

Alert Sound –

Select sound to play when for an alert.

Display options –

In each video frame, there are two status bars, which contain

"Camera location", "Connect time", "Remote time" and "Record time". All of

them can be enabled here individually.

Remote Time

Location (Channel number + Text on Video

Recording Time (day hour:min)

Connect Time (day hour:min)

Backup Settings –

Select the backup directory, the backup size for your backup

media, and the backup locations. Also you can delete backup locations here.

The maximum locations can not exceed 32.

Last Backup Time –

Indicates the last time a backup occurred. "All Backup"

means all the data in this location have been backup, and "No Data" means

there is no data stored in this location.

Internet Settings –

Set the proxy and IP filters.

Table of Contents