D-Link DCS-2000 Manual page 13

Click OK and the DCS-2000 Internet Camera will reboot to accept the settings.
If the Installer has not made any modifications to the settings, it will warn you
that the settings were accepted but no changes were made.
You should now see the opening Installer screen with an IP address assigned
to the MAC address of the DCS-2000.
Click on Exit to close the Installer.
You have now completed the Setup Wizard and are ready to use your
camera!
Testing the DCS-2000 Internet Camera
Open your Internet browser
and type in the IP address of
the DCS-2000. In this example
the address is:
http://192.168.0.146
(your DCS-2000 may have a
different IP address based on
what you used in the Installer
program.)
The window in the center of your browser is the camera image window. You
should now see a video image and hear the audio over your computer speak-
ers from the DCS-2000. If you are having problems please consult the
Troubleshooting section of this manual.
13