Draytek Vigor2000 User Manual page 9

Getting Started
1.1 Introduction
The Vigor2000 Router provides multiple users with efficient and reli-
able access over a single ISDN BRI, IDSL (U Interface), DSL line, or
Cable Modem (not support Dynamic IP) service to the Internet and
corporate LAN for using E-mail, sharing documents, Web surfing, file
transfers, etc. Moreover, the provision of a built-in six-port 10BaseT
Ethernet hub and one Uplink port may give cost-effective workgroup
connectivity over Ethernet.
In addition to improving the productivity of employee, flexible
telecommuting access, and affordable management cost, Vigor2000
Router accommodates room for business growth from 6-7 computers
to more. The smart solution of DrayTek Vigor2000 Route provides
SOHO users an `easy to setup and use`, `instant internet and intranet
connection`, `high interoperablility`, and `good security` for network
management.
The broadband access protocol supports PPPoE, PPTP, and Static
IP. These protocols comply with worldwide Ethernet-based DSL/Cable
Modem standards.
For traditional ISDN users, the Vigor2000 Router features a built-in
Virtual TA (Remote CAPI) server which operates as a CAPI-based
ISDN TA for LAN users. To run FAX transmission or data transfer serv-
ices, users need to install a Virtual TA client driver on the PCs and
use third-party CAPI-based software .
Vigor2000 Router provides seamless migration from ISDN to a
broadband connection for multiple SOHO users and easy usage of
ISDN for backup-dial and/or remote access while concurrently using
the DSL/Cable modem connection.
PPPoE / PPTP allows users on the LAN interface to setup a dial-on-
demand DSL connection sharing the same IP account, and paying for
only ONE connection. The idle-timeout function prevents wasted
connection charges by shutting down the connection when it is idle.
No PPPoE / PPTP client software is required for the computers. Hassle
free!
1-2