Draytek Vigor2000 User Manual page 119

System Management
3. Click Start -> Programs -> Router Tools -> Firmware Upgrade
Utility to launch the Firmware Upgrade Utility.
The Router IP field will show the IP address of your router. Click
"Browse" to select the new firmware file. The file shown here
(v2k00106.bin) is for example purpose only and the latest firmware will
have a different file name. Click "Upgrade". The upgrade status will
be shown on the progress bar.
Note:
The definition of firmware filename:
v2kxxxxx.bin: Binary code file of the firmware.
v2kxxxxx.web: WebPages file of the firmware.
v2kxxxxx.cfg: Default settings file of the firmware.
v2kxxxxx.all: v2kxxxxx.bin + v2kxxxxx.web.
v2kxxxxx.rst: v2kxxxxx.cfg + v2kxxxxx.bin + v2kxxxxx.web.
Note:
When you upgrade firmware, the *.bin file should be
the first file you upload and then the *.web. After 30
seconds, reboot your router. If you do not follow these
steps, you may have problems upgrade the firmware.
7-16