Draytek Vigor2000 User Manual page 54

Table of Contents

Advertisement

Basic Setup & Internet Access
PPPoE Setup
PPPoE Link: Check "Enable" to enable the PPPoE client
protocol.
ISP Access Setup
ISP Name: Enter the ISP name.
Username: Enter the ISP supplied username.
Password: Enter the ISP supplied password.
ISDN Dial Backup Setup
Dial Backup Mode: Select "None" to disable this feature or
select "Packet Trigger" to activate this feature (refer to
3.5.4).
PPP/MP Setup
PPP Authentication: Select "PAP or CHAP" for widest
compatibility.
Idle Timeout: Idle timeout means the router will disconnect
after being idle for a preset amount of time. The default is 180
seconds. If you set the time to 0, the PPP session will not
terminate itself.
Fixed IP: Check "No (Dynamic IP)" unless your ISP has pro-
vided you with a static IP address.
Fixed IP Address: If your ISP has provided you with a static IP
address enter it here.
ISDN Dial Backup Setup
Dial Backup Mode: Select "None" to disable this feature o r
"
select
Packet Trigger
3-16
"
to activate this feature (refer to 3.5.4).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vigor2000 and is the answer not in the manual?

Table of Contents