Draytek Vigor2000 User Manual page 89

Call Filter: Check "Enable" to activate the Call Filter function.
Assign a start filter set for Call Filter.
Data Filter: Check "Enable" to activate the Data Filter func-
tion. Assign a start filter set for Data Filter.
Log Flag: For troubleshooting purpose, you need to specify
the filter log here.
None: The log function is inactive.
Block: All blocked packets will be logged.
Pass: All passed packets will be logged.
No Match: The log function will record all packets that
are unmatched.
Note:
The filter log will be displayed on the Telnet terminal when
you type the "log -f" command.
Advanced Setup
5-13