Draytek Vigor2000 User Manual page 72

Both: allow access of both outgoing and incoming calls.
Dial-Out: allow access of outgoing calls only.
Dial-In: allow access of incoming calls only.
Idle Timeout: Default setting is 300 seconds. When a
connection of a profile has been idled longer than the time limit
, the router will drop the connection.
Dial-Out Settings
Username: Specify a username for authentication by the re-
mote router.
Password: Specify a password for authentication by the re-
mote router.
Dial Number: Specify the destination ISDN number for dialup.
Link Type: Indicate the dial-out link type.
Disable: Deactivate the dial-out action.
64kbps: Specify the outgoing connection speed is
restricted to 64kbps (one B-channel).
128k bps: Specify the outgoing connection speed is
128kbps (two B-channels).
BOD: Specify the link type to be dynamic bandwidth
control (Bandwidth-on-Demand).
PPP Authentication: Specify the authentication method.
Normally set to PAP/CHAP for the widest compatibility.
VJ Compression: VJ Compression means TCP/IP protocol
header compression. Normally set to "Yes" to improve band-
width utilization.
Callback Function (CBCP): The callback function is
implemented by the CBCP protocol that is one of the PPP
protocol suite.
Remote Access
4-13