Replacing The Throttle - Handicare TROPHY 20 Service Manual

Trophy 20
5.4.5 Console

Replacing the throttle

Preparation
• Switch off the scooter with the ignition key.
Instructions
The following operations are required to replace the
throttle:
Note! Suitable work area required!
• Remove the basket and the mounting bracket for the
mirrors.
• Remove the knob of the speed potentiometer, the two
bolts and remove the front tiller cover.
• Remove the nut, the four Ejot screws and the
dashboard.
• Disconnect all connectors from the tiller PCB.
• Remove the three Ejot screws to remove the tiller PCB.
• Remove the two recessed button head screws to
remove the console bottom.
• Disconnect the connectors of the console bottom.
• Remove the two sheet metal screws and the throttle;
disconnect in between the connector of the throttle.
• Mount the new throttle.
• Rebuild the scooter in the reverse order.
1
Relevant article numbers
• 1008055 Throttle (potentiometer)
Tools used
• Socket, 10 mm
• Screwdriver, crosshead
Notice
• N.a.
2
Service instructions | 59 Service instructions | 59