Tyres; Assembly, Replacement And Adjustment Instructions - Handicare TROPHY 20 Service Manual

Trophy 20

5.3 Tyres

To ensure that your scooter performs well, it is of great importance for the tyres to be kept at the right pressure.
Infl ating the tyres
The tyres are equipped with a car tyre valve. You can have the tyres infl ated by your dealer, or at your local petrol station. You
can also infl ate the tyres yourself using a hand or foot pump. Remove the caps from the valves before infl ating the tyres. If
the tyres are not adequately infl ated, the range of the scooter may be reduced and the tread may wear more quickly. See the
'product specifi cations' for the correct tyre pressure.
Warning!
When infl ating tyres, never exceed the maximum recommended tyre pressure which is stated on the tyres (2.5 bar front and 3.5
bar rear).
Never forget to replace the valve cap after infl ating the tyres. The valve cap prevents dirt and sand from getting into the valve.
See the 'Maintenance table' regarding tyre checks.
Contact your dealer to repair tyre punctures.

5.4 Assembly, replacement and adjustment instructions

This chapter covers illustrated assembly, replacement and adjustment instructions.
Every separate visual instruction is prefaced with:
• Preparation instructions
• Relevant article numbers
• Tools used
• Info (suggestions and advice to help you carry out tasks or procedures more easily)
• Notices (extra notes covering information you need when executing the specifi c task)
In the visual instructions illustrate the tools needed for the specifi c task.
Service instructions | 29 Service instructions | 29