48 | Service instructions
48 | Service instructions
Adjustment the shock absorber - rear
Preparation
• Switch off the scooter with the ignition key.
Instructions
The following operations are required to adjust the shock
absorber - rear:
Note! Suitable work area required!
• Remove the seat.
• Remove the battery cover.
• Loosen the battery strap.
• Disconnect all connectors from the battery.
• Remove the battery.
• Read the table for more information about the
adjustment of shock absorbers.
• Use the special adjustment tool to adjust the shock
absorber as desired.
• Rebuild the scooter in the reverse order.
1
Relevant article numbers
• 9000825 Suspension adjustment key
Tools used
• Special adjustment tool for shock absorbers
• 9000825 Suspension adjustment key
Notice
• Make sure the scooter is switched off.
2
Trophy 20