Adjusting The Throttle Cable Free Play - Yamaha YJ50RN Service Manual

ADJUSTING THE ENGINE IDLING SPEED/

ADJUSTING THE THROTTLE CABLE FREE PLAY

6. Adjust:
• throttle cable free play a
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY".
Throttle cable free play
(at the flange of the throttle grip)
1.5 ~ 3.5 mm (0.06 ~ 0.14 in)
EAS00058
ADJUSTING THE THROTTLE CABLE FREE
PLAY
NOTE:
@
Prior to adjusting the throttle cable free play,
the engine idling speed should be adjusted.
1. Check:
• throttle cable free play a
Out of specification → Adjust.
Throttle cable free play
(at the flange of the throttle grip)
1.5 ~ 3.5 mm (0.06 ~ 0.14 in)
2. Adjust:
• throttle cable free play
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Loosen the locknut 1.
b. Turn the adjusting nut 2 in direction a or
b until the specified throttle cable free play
is obtained.
Throttle cable free play
Direction a
is increased.
Throttle cable free play
Direction b
is decreased.
c. Tighten the locknut.
WARNING
@
After adjusting the throttle cable free play,
start the engine and turn the handlebar to
the right and to the left to ensure that this
does not cause the engine idling speed to
change.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
3 - 8
CHK
ADJ
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
3