Installing The Handlebar - Yamaha YJ50RN Service Manual

1
EAS00671

INSTALLING THE HANDLEBAR

1. Stand the scooter on a level surface.
@
Securely support the scooter so that there
is no danger of it falling over.
2. Install:
1
• handlebar 1
• upper handlebar holders 2
2
CAUTION:
@
• First, tighten the bolts on the front side of
the handlebar holder, and then on the rear
side.
NOTE:
@
• Install the upper handlebar holders with the
grooves a facing inward.
• Align the match marks b on the handlebar
with the upper surface of the lower handlebar
holder.
3. Install:
• left handlebar switch 1
NOTE:
@
Align the mating surfaces of the left handlebar
switch with the punch mark a on the handle-
bar.
4 - 20
CHAS
HANDLEBAR
WARNING
10 Nm (1.0 m · kg, 7.2 ft · lb)