Table of Contents
Advertisement
One Touch Key Function
You can register a maximum of three partners you contact
often or often used functions. The One Touch Key function
allows you to easily call registered partners and launch
registered functions.
Registering a One Touch Partner
When the standby screen is displayed, press
X/Y/Z.
➡ Use u/d to select YES and then press
c (OK).
➡ Use u/d to select Partner Entry and then
press c (Select).
➡ Use u/d/l/r to select a one touch
partner, press ) (Detail) and then c (OK).
• When registering a phone book entry with multiple
phone numbers and e-mail addresses as a one touch
partner, select the phone number and e-mail address
to use with the One Touch Key function.
➡ Use u/d to select Display Image and then
press c(Select).
• Follow the on-screen instructions to select the image
you want to display on the standby screen.
• When you delete a phone book entry registered in
a one touch partner, the phone book entry is also
deleted from the One Touch Key function.
Making a Call to a One Touch Partner
When the standby screen is displayed, press
X/Y/Z.
➡ Press N.
Sending Mail to a One Touch Partner
When the standby screen is displayed, press
X/Y/Z.
➡ Use u/d to select Send E-Mail or Send
C-Mail and then press c (Select).
• To create an e-mail message, see "Creating and
Sending E-mail Messages" on page 46. To create
a C-mail message, see "Creating and Sending C-mail
Messages" on page 49.
45
Advertisement
Table of Contents
