Troubleshooting - AU K012 Basic Manual

Troubleshooting

Symptom
●Is the battery pack charged?
Cannot turn on
●Did you slide the power switch toward
power.
入?
●Is power turned on?
●Is
Cannot make calls.
●Is your hand or a metal object covering
the area around the built-in antenna?
● Did you enter the phone number starting
with the area code?
●Is
Cannot receive calls.
●Is power turned on?
No response when a
●Is power turned on?
key is pressed.
●Is there enough power left in the battery
A warning tone sounds
pack?
and power turns off.
Calls are answered
●Is Answer memo turned on?
automatically.
Possible Cause
(out of range indicator) displayed?
(out of range indicator) displayed?
Remedy
Charge the battery pack.
Slide the power switch toward 入.
Slide the power switch toward 入.
Move to a location where
indicator) is no longer displayed, and try
again.
Make sure your hand or any other metal
object is not covering the area around the
built-in antenna.
When making a call to a phone other than
a cell phone, you need to enter the area
code even if you are inside the same area.
Move to a location where
indicator) is no longer displayed.
Slide the power switch toward 入.
Slide the power switch toward 入.
Charge the battery pack.
Hold down C for at least one second to
turn off Answer memo.
Page
26
28
28
(out of range
30
25
35
(out of range
30
28
28
26
38
63