Entering E-Mail Addresses; Deleting Characters; Starting A New Line - AU K012 Basic Manual

■
Entering Two or More Characters
Assigned to the Same Key
After you enter the first character, press r and then enter
the next character.
■

Deleting Characters

To delete one character at a time, move the cursor to the
character you want to delete and then press C. To
delete all characters to the right of the cursor, hold down
C for at least one second. If there are no characters to
the right of the cursor, holding down C will delete all the
characters.
■

Starting a New Line

Press #.

Entering E-mail Addresses

■
E-mail Address Compatible Characters
• Before you enter an e-mail address, switch to the single-
byte alphanumeric mode.
• When changing your e-mail address, you can enter up
to 30 single-byte alphanumeric and symbol characters
for the account name (part to the left of @). Note the
following:
- Uppercase characters cannot be used.
- Period (.) cannot be used continuously, and cannot be
used as the first or last character.
- Zero (0) cannot be used as the first character.
■
How to Enter E-mail Addresses
Example: Entering "taro.23@kddi.co.jp"
Enter "taro.23".
t : Press 8 once.
a : Press 2 once.
r : Press 7 three times.
o : Press 6 three times.
. : Press 1 once.
2 : Press 2 once and then #.
3 : Press 3 once and then #.
➡ Enter "@".
@: Press 1 twice.
41