Lexicon Fx - SoundCraft Si Compact User Manual

LEXICON
The Si Compact features four amazing Lexicon FX processors, each processor has it's own dedicated
bus and up to four stereo input channels may be assigned as the FX Returns;
The selected
FX processor
LEXICON CONTROL:
1. Press the LEX key to open the LCD page on the main Lexicon
NOTE: If one of the FX Follow modes (1-4) were active the Lexicon control will 'land' on that
FX processor when you open the FX page.
2. Press the SCROLL/ADJUST encoder to select an alternate patch type from the drop-down list.
3. Parameters for the active FX Process & Path are shown above each of the four encoders directly
4. In the event there are more than four parameters on the current patch use the PAGE tabs to
NOTE: If the chosen effect type has a TEMPO functtion the associated TAP key on the surface
can be used to set the measure; the key will flash in-time with the set tempo.
NOTE: If an FX processor has no stereo channel assigned as a return then it is not
possible to mix to the associated FX bus. See tOTEM and Patching for further details.
30
FX
TM
The current page
Menu allowing selection of an FX processor, changing of
patch type and adjustment of parameters within the patch.
below the screen, these are used to adjsut the parameters values in real time
access the additional parameters
The value of
the parameter
Soundcraft Si Compact User Guide 1211
The active patch