Fader Setup - SoundCraft Si Compact User Manual

FADER SETUP

The fader setup provides a mean to define
which channels (or buses) appear on which
faders of which layers.
This feature allows processing channels or
buses to be moved between layers and is
accessed from the FADER SETUP menu;
there are essentially two elements to this,
making new assignments and moving channels.
Making a new assignment or changing a current assignment in the SELected slot.
The FADER SETUP page displays three fixed data fields of:
•
•
•
The next four fields group the available
processing channels and buses allowing
easy selection of the channel or bus you
wish to assign to the SELected slot.
Moving assignments on the active layer.
There are two types of functions that assist in re-ordering channels on a layer INSERT and
SHIFT each with a << (left) or >> (right) option, these functions are similar but subtly different.
INSERT will insert a blank (unassigned) fader in the SELected slot and move all other
assignments left (right).
SHIFT allows an assigned fader to be moved up (down) provided the adjacent slot is
unassigned.
The current active fader layer may be reset to the factory default using the RESET LAYER button.
NOTE: Fader assignments are stored per show.
NOTE: To avoid complication only inputs may be placed on the IN A and IN B layers whilst
only bus masters may be placed on the BUS and MATRIX layers.
NOTE: the same channel or bus may only be placed twice on any layer.
40
Fader Bank – Current active fader bank
Slot Number – which slot (position) has the SELect active
Channel Assignment – The name assigned to the processing channel in that slot
Soundcraft Si Compact User Guide 1211