Fader Layer Keys; Faderglow - SoundCraft Si Expression Quick Start Manual

FADER LAYER KEYS

Fader Layer Keys change the function of the faders to the left of the
master faders:
1. A: Layer ' A ', nominally inputs.
2. B: Layer 'B', nominally inputs.
3. C: Layer 'C', nominally bus masters.
4. D: Layer 'D', nominally Matrix Masters.
5. GEQ LO: The lower half of the GEQ.
6. GEQ HI: The upper half of the GEQ.
NOTE: The GEQ pages are only available when an audio master
fader is SELected.

FADERGLOW

The FaderGlow™ system illuminates the fader slot when the function of the fader is anything other
than 'a mono input channel level control' according to the following list:
Yellow:
Green:
Orange:
Red:
Cyan:
Magenta:
White:
Soundcraft Si Expression Quick Start Guide 1112
TM
Mix 1-14 bus master nominally set as PRE fade or contribution from a channel
to a mix bus sent pre-fade from the channel.
Mix 1-14 bus master nominally set as POST fade or contribution from a channel
to a mix bus sent post-fade from the channel.
Matrix 1-4 bus master or contribution from a bus or mix L, R or Mono to a matrix.
GEQ.
Stereo input patched as an FX return or contribution from an input to an FX mix.
Stereo input patched to a line source other than an FX processor.
Linked mono channel.
1
2
3
4
5
6
11