Control Codes In The Text Mode - Epson FX-80 Operation Manual

.........
This chapter describes the control codes for the FX-80/FX-100 printers. Firstthe
codes for the Text mode are explained (Definition of download characters is
explained at the end of this section) and then the control code related to the
Bit-image mode are explained. Control codes ESC i (incremental and view print)
and ESC j (reverse feed) are used only with the FX-80.
3.2 Control Codes in the Text Mode
BEL
I~mbf:j
BEL - Bell
IIN(;¥O{it."1
CHR$(7);
ujllRUIJII
Sounds the buzzer.
When the BEL code is input, the buzzer sounds for approximately
0.1 second.
LPRINT CHR$(7);
<beep>
NOTE:
To disable the buzzer, set DIP switch pin
2-2
to the OFF position.
3-6
I .
~