Epson FX-80 Operation Manual page 108

ESC S
Ulman·li.
ESC S - Superscript/Subscript Mode Setting
CHR$(27); "S" ;CHR$(n);
(1) n=O or 48: Sets Superscript print mode.
(2) n=1 or 49: Sets Subscript print mode.
Sets Superscript/Subscript mode.
(1) Sets Superscript print mode. (n=O or 48)
When ESC S (O)D or ESC S (48)D code is input, all the data
following this code is printed in Superscript print mode. In this
mode, a character measuring 1.6 mm (H) is printed on the upper
half of the line.
This code can be cancelled by input of the ESC T code.
I
\
'"
e=llill
ESC T
'#hI)'''_'
10' SLlP er sc rip t Mod e
20 LPRINT CHR$(27);"E";
30 LPRINT "Y=aX";CHR$(27);"F";
40 LPRINT CHR$(27);"S";CHR$(ll);CHR$(15);
'50 LPRINT "3";
60 LPRINT CHR$ (27) ; "T"; CHR$ (18) ;
70 LPRINT CHR$(27);"E";
80 LPRINT "+bX";CHR$(27);"F";
90 LPRINT CHR$(27);"S";CHR$(0);CHR$(15);
100 LPRINT n2";
110 LPRINT CHR$ (27) ; "T"; CHR$ (18) ;
120 LPRINT CHR$(27);"E";
130 LPRINT n+cX+d"