Epson FX-80 Operation Manual page 29

1.7.4 Cut sheet (with friction feed)
The FX printer accommodates cut sheets measuring 7.25" to 8.5" (FX-80) 7.25" to
14.4" (FX-l00) by 12" (maximum).
NOTE:
When using cut sheet, be sure to remove the tractor unit (optional for the FX-80).
When using cut sheet with the FX-lOO, attach the printer cover .and printer lid for
friction feed included as standard accessories.
To load a cut sheet, observe the following procedure.
1. Raise the printer cover.
(With the FX-80 printer, slide both sprockets outward to the sides and lock the
sprocket lock levers.)
2. Pull the scale toward the front of the printer to detach the scale from the platen.
3. Unlock the release lever.
Release lever
Scale
Loading of Cut Sheet
4. Insert the cut sheet between the paper guides at the rear part of the printer
mechanism. For the FX-80, the paper must be positioned so that the sprockets
will not be in the way.
1-18
i
I. -
i
'
. .
(
.