Epson FX-80 Operation Manual page 115

ESC
mml'
uml4inm
•
I
ESC i-Incremental and view print
CHR$(27); "i
I I
;CHR$(n);
n 1 or 49: Enters into incremental and view print mode
n
=
0 or 48: Returns to normal operation
Prints each character incrementally.
(1) ESC i (l)D or ESC i (49)D code causes the printer to print each
character every time it is input.
If the data is input at intervals of less than approx. 0.1 sec,
printout will be performed continuously.
(2) When n=O or 48, the printer returns to normal operation. In the
Incremental mode, printing is unidirectional.
When the Incremental print mode is cancelled, the printer will
return to the bidirectional printing.
NOTE:
This code can be used only with the FX-80.
3-64