Epson FX-80 Operation Manual page 26

<Additional Information>
(1) Paper arrangement
When the FX-80/FX-100 is to be used on a desk or a bench, arran'
~ment
of the
pin-feed paper in parallel with the printer as shown below will pem it the paper to
be folded in an accordion style.
i ·
(
~
I
Course of
paper
Example of Paper Arrangement
(2) Column layout on pin-feed paper
When pin-feed paper measuring from
9.5"
to 10" (FX-80) or
4"
to 16" (FX-100) in
width is supplied, the graduations on the scale can be used as the indexes of print
column positions.
I
FX-80 column positions: 1 to 80
FX-lOO column positions: 1 to 136
Alignment of the print start position on pin-feed paper with the 1st column position
at the extreme left of the scale will facilitate column layout. Accordingly, center the
paper by adjusting it to these indexes of the scale.
(3) Removal of pin-feed paper
To remove the pin-feed paper, follow either of the two methods described below.
1) Pull the paper forward out of the printer by turning paper feed knob.
NOTES:
1. Do not attempt to pull out the paper in the backward direction.
2. Do not turn the paper-feed knob while the power is ON.
2) Feed the paper out of the printer by pushing the Line Feed or Form Feed
switch. At this time, the power switch of the printer must be set to the ON
position and the printer must be in the OFF-LINE mode.
1-15