Epson FX-80 Operation Manual page 34

Fx printer
Hide thumbs Also See for FX-80:
Table of Contents

Advertisement

(2) Adjust tht position of the head adjusting lever according to the type of paper to
be used.
Paper
Position of adjusting lever
Single-leaf paper
Set the lever to the 3rd step.
Carbon paper cheets
Set the lever to the 6th step.
The third step (for single-leaf paper) is that is which the handle of the adjusting
level is parallel with the top of the mechanism (the point at which the lever is
aligned with the V-groove in the frame on the left side of the mechanism).
e
Backward
Head adjusting lever
V-groove
6th step
(Left side of mechanism)
Gap
Adjustment
(2)
NOTES:
1. Should printed characters become faint due to the use ofthe printerfor an ex-
tended period, move the head adjusting lever backward (in the
e
direction)
by one step.
2. When a set of carbon paper sheets is used, be sure that no characters are
printed within the area two lines each above and below the perforation.
1-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx-100

Table of Contents