Ganz PixelPRO ZN-DT2MA User Manual page 6

6. Micro SD card
Save snapshot images and video onto a Micro SD card.
7. Reset Button
Press this button to install the camera using the GANZ Dynamic Domain Name Service
(DDNS), or to restore the camera configuration to its factory default settings.
8. Status LED
LED
Network
Status
9. Video Output for Service monitor
This analog video output is available when installation mode is set to ON. Use accessory cable
to video output.
Color Indication
Green On
Amber Flash
Unlit -
On
Green
Flash
Red Flash
System Status
Connection to 10/100Mbps Network / LAN.
Indication of network activity.
No network connection established.
Network connection is established.
Camera is booting up.
Firmware Upload in progress.