Ganz PixelPRO ZN-DT2MA User Manual page 5

1. Network connector
The GANZ PixelPro connects to the network via a standard network cable, and automatically
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket
could also be used to power the GANZ PixelPro via Power over Ethernet (PoE). The camera
auto-senses the correct power level when using a PoE (Class 2) switch, router or injector.
2. Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal)
3. Audio out
The Audio output (line level), which could be connected to a line output of a microphone system
or an active speaker with a built-in amplifier.
4. Alarm in / Alarm out
One analog (dry contact) alarm input / One relay output ( 2A : AC120V / DC60V )
Pin Assignment
5. Power Connector
12VDC or 24VAC power connector