Plena Power Amplifier | Installation and User Instructions | Operation
Switch on and off
Potential equipment damage. Before applying
power, always check the mains voltage selector
at the rear of the unit.
1 Make sure the mains voltage selector (115/230 VAC)
is correctly set for the country's main voltage (see
2 Set the power button (1) on the front of the unit to
On - pushed in.
Bosch Security Systems | 2008-02 | PLE-1P120-EU, PLE-1P240-EU en
Set the power button (1) on the front of the unit to Off -
figure 5. 1 : Voltage selector
en | 17