Rear Panel - Bosch Plena Easy Line PLE-1P120-EU Installation And User Instructions Manual

Plena Power Amplifier | Installation and User Instructions | Description
2.4.2

Rear panel

See figure 2.3 for an overview of the connectors and
switches:
1 Cooling fan.
Note
Always allow adequate space at the rear of the
unit for ventilation.
2 100V input, Euro style pluggable screw terminal
connector. Input is wired in parallel with the line
input (see number 3).
3 Line input, XLR connector. Input is wired in parallel
with 100 V input (see number 2).
4 Input volume control - control range -25 dB to 0dB
(see numbers 2 and 3).
5 Loop through output, XLR connector.
figure 2.3: Rear panel
Bosch Security Systems | 2008-02 | PLE-1P120-EU, PLE-1P240-EU en
1
2
6 Outputs and 24 VDC in/out:
• Outputs, Euro style pluggable screw terminal
connector - 100 V, 70 V and 8 Ohm.
• 24 VDC in/out:
• Input: 24 VDC backup power.
• Output: built in charger, maximum 0.5 A.
regulated output current.
7 Mains voltage selector, C13 - 115/230 VAC
50/60 Hz.
8 Mains fuse.
9 Earth connection screw.
Note
The unit must be earthed.
10 Mains connector (3-pole).
3 4 5 6
en | 10
7
8 9 10