TC-Helicon VoiceLive 3 Reference Manual page 97

Headphone Limiter parameter
Use the Headphone Limiter parameter to set the
limiter level for the headphone output.
0 dB allows for maximum potential headphone
output. Levels below 0 dB (-3 dB etc) will restrict
or "limit" the maximum potential headphone out-
put. When using in-ear monitors, you may want
to set the limiter in order to prevent hearing dam-
age by transient loud noises such as feedback.
VoiceLive 3 – Reference manual (2014-03-29)
Talk Trim parameter
Use the Talk Trim parameter to adjust the volume
of your lead voice when "Talk/Bypass" mode is
engaged. It's not uncommon for performers to
want a little bit more or less volume through the
PA when effects are bypassed.
Setup
95