TC-Helicon VoiceLive 3 Reference Manual page 114

Step Button Mode parameter
Use the Step Button Mode parameter to set the
operation mode of the Step button.
– Latched: Tap the button to activate the as-
signed effect, tap it again to deactivate it.
Momentary:
– The assigned effect is on only
when you hold down the footswitch.
For more information, see "Change a button
from Latched to Momentary mode".
VoiceLive 3 – Reference manual (2014-03-29)
Mic Switch Function parameter
Use the Mic Switch Function parameter to ac-
tivate Mic Control and assign a function to the
switch on your microphone.
Activates microphone control and sets its func-
tion.
Parameter settings:
– Off
– µMod
– Delay
– Reverb
– Vocal HIT
– Double
– Harmony
– Transducer
– HardTune
– Rhythmic
– Stutter
– Choir
– Synth
– Harm(ony) Hold
– Step
– Tap Tempo
– Bypass
– All HIT
– Preset Up / Preset Down**
– Preset Step
* Harmony must be active for this to have an ef-
fect.
** Tapping the Mic switch will switch to the next
or previous Preset. Holding the Mic switch will
reverse direction (increment / decrement).
Mic Switch Mode parameter
Use the Mic Switch Mode parameter to set the
operation mode of the switch on your Mic Con-
trol-enabled microphone.
– Latched: Tap the Mic switch to activate the
assigned effect, tap it again to deactivate it.
– Momentary: The assigned effect is on only
when you keep the Mic switch pressed.
For more information, see "Change a button
from Latched to Momentary mode".
Setup
112