TC-Helicon VoiceLive 3 Reference Manual page 22

Hide thumbs Also See for VoiceLive 3:
Table of Contents

Advertisement

Outputs
VoiceLive 3 outputs overview
VoiceLive 3 – Reference manual (2014-03-29)
7
1.
Guitar THRU:
If you only need chord detec-
tion and want to pass your dry guitar signal
onto a different processor or record a dry gui-
tar track, use the THRU jack to pass your gui-
tar signal to your amp.
Monitor THRU:
2.
The Monitor THRU jack al-
lows you to receive an incoming Monitor IN
signal from a mixer and pass it on to another
monitor.
3.
Headphone out:
Connect headphones or
IEMs to the Headphone out and use the Head-
phone Mix to set up your personal mix.
Main Outputs:
4.
The Main Outputs carry Vo-
cals & Effects. If nothing is connected to the
Guitar outputs, Main outputs also carry Guitar
signals.
Guitar Outputs:
5.
The Guitar outputs carry the
Guitar signal. If only one output is connected,
guitar output is automatically in MONO. When
you connect the Guitar Out(s) to your amp(s),
guitar sounds will be removed from the Main
outputs.
6.
MIDI Out:
The MIDI Out jack sends MIDI Con-
trol Change messages (MIDI CCs) related to
footswitches and buttons pressed on Voice-
Live  3. If no CC is sent, there is likely no CC
assigned to that particular action.
Currently, Vocal & Guitar effects ON/OFF and
their respective levels are represented by MIDI
Control Change messages.
If you experience hum from your guitar amp or
PA, try pressing the GRND LIFT switch, locat-
ed between the Headphone out and the Left
XLR output.
Introduction
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF