Aiming System - Datalogic PowerScan BT8300 Family Quick Reference Manual

Using the PowerScan™ BT8300

Aiming System

™
PowerScan BT8300 provides an aiming system. If enabled, a partial trigger
press produces a red spot, which should be aimed over the code center to get the
best reading performance, see (1) in the figure above. By completely pressing the
trigger the scan line appears to start the code scanning, see (2).
After setting up the reader, you can enable or disable the aiming system by reading
the codes below:
4
Disable Aiming System (Default)
Ì$+Bj0$-"Î
Enable Aiming System
Ì$+Bj1$-'Î
PowerScan™ BT8300