Charging The Batteries - Datalogic PowerScan BT8300 Family Quick Reference Manual

Charging the Batteries

Once the BC 8030-BT/C-8000 is powered, you can charge the reader's batteries.
Place the PowerScan
battery charger. The Reader LED on the cradle/battery charger turns red.
The battery is completely charged when the Reader LED on the cradle/battery
charger turns green.
Figure 1. Changing the Batteries
WARNING
Quick Reference Guide
™
BT8300 into the BC 8030-BT cradle or the C-8000
Do not incinerate, disassemble, short terminals or expose to high
temperature. Risk of fire, explosion. Use specified charger only.
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of the batteries as required by the relevant laws in force.
1
Installing the Battery Pack
2
7