Reading Parameters; Aiming System; Good Read Green Spot Duration - Datalogic Gryphon I GD441 Series Quick Reference Manual

General purpose corded handheld area imager bar code reader

Table of Contents

Reading Parameters

Move the reader toward the target and center the aiming pat-

tern and illumination system to capture and decode the image.

See

for more informa-

Using the Gryphon™ I GD44XX on page 7

tion.

The aiming system will briefly switch off after the acquisition

time, and if no code is decoded will switch on again before the

next acquisition. The illuminator will remain on until the

symbol is decoded.

As you read code symbols, adjust the distance at which you are

holding the reader.

A number of options for customizing control of the Aiming

System are available. See the Gryphon I GD44XX PRG for

more information and programming bar codes.

Successful reading can be signaled by a good read green spot.

Use the bar codes that follow to specify the duration of the

good read pointer beam after a good read.

ENTER/EXIT PROGRAMMING MODE

Short (300 ms)

Disabled

Medium (500 ms)

Long (800 ms)

Quick Reference Guide

Table of Contents