Choosing A Radio Station - C. Crane CCWiFi Instruction Manual

Connecting to a Network Using Ethernet Cable
2. Connect the opposite end of the Ethernet cable to the Ethernet
port on the back of your radio.
3. Plug in the power cord to the radio.
After a few seconds the connection light will flash indicating a good
connection
After the radio successfully connects to your router it will automatically
go to the "primary menu" that contains four options: STATIONS, CON-
FIGURE, MEDIA PLAYER, and ALARM CLOCK.
Need Help?: refer to help page 30 for troubleshooting connection
problems. Note: A chart containing a menu tree flow chart is located on page 34.

Choosing a Radio Station

1. From the primary menu, choose "Stations" by turning the dial until
brackets are positioned on both sides. Press the dial to select.
2. Next, turn the dial to choose a radio station from ether the
"Location" or "Genre" menu. Press the dial to continue into the
selected menu.
Note: The "Location" menu enables you to choose a radio station
from a particular continent then country. The "Genre" menu enables
you to choose a radio station by categorized content – for example:
"Dance, Classical, Rock, Talk" etc.
<
Location
Genre
Need Help?: To find which genre or location contains your favorite
CC WiFi
<
Stations
Configure
Or
>
>
Location
<
Genre
(optional)
>
Page 11