Scanning For Wireless Networks; Connecting To A Wireless Network - C. Crane CCWiFi Instruction Manual

Scanning for Wireless Networks

When <Scan for Networks> is displayed, press "SELECT" by press-
ing "in" the main dial (the main dial should click when pressed in).
The display will show:
If the radio cannot find any wireless networks, then the display will
show:
If no networks are found, see page 28 for troubleshooting assistance.

Connecting to a Wireless Network

When the radio finds wireless networks, it will show the network
names (also called the ESSID) in the display screen.
Example:
Note: You can always use the BACK button to start over at the previ-
ous screen.
The first two wireless networks will show in the display after the wire-
less network scan. There may be more wireless networks to choose
from by further rotating the dial.
Example:
CC WiFi
Scanning
No networks
found
<
WiFi Network 1
WiFi Network 2
<
WiFi Network 2
Your Network
>
>
Page 7