Electrolux E36IC75FSS Service Manual page 17

INDUCTION COOKTOP DISPLAY MESSAGES
LED MESSAGES OR LIGHT INDICATORS DISPLAYED BY COOKING ZONE CONTROLS (CONT'D)
POWER LEVEL SETTINGS - The Cooking Zones have fi ve separate Power Level
LEDs. Once active, the Cooking Zones will provide 10 Power Levels to choose
from. These include 1 2, 3, 4, 5, 6 (fi g. 14), 7, 8, 9. The highest setting of P or
"Power Boost" provides 125% power level for 10 minutes (See Fig. 13). Each
key pad touch (or just holding down the Power Level key pad) will scroll through all
the available power levels for any Cooking Zone quickly (See owners manual for
complete instructions).
RESIDUAL HEAT - Once any Cooking Zone has been used for cooking and turned
OFF, and if the cooktop surface temperature on any of the Cooking Zones is still too
HOT, H (See Fig. 15) will appear in the LED display for the affected Cooking Zone.
The H will continue to display if the temperature is still too HOT.
KEEP WARM - Use the WARM (or LOW) key pad to activate the Warm setting
for any of the Cooking Zones. The ON/OFF key pad for the desired Cooking Zone
must be activated fi rst, then touch the WARM key pad located in the Cooktop Main
Control area once to set. L (LOW) should appear in the corresponding Cooking Zone
LED (See Fig. 16 ).
PAN DETECTION - All fi ve Cooking Zones will provide a Pan Detection message.
If a Cooking Zone is turned ON and no pan is detected for the Cooking Zone, the
pan has been moved or if the pan is not centered correctly or if the pan is not made
of magnetic material, F (See Fig. 17) will appear in the affected Cooking Zone LED
display.
Page 17