11. Get the pocket. Using a utility knife, cut the two
lugs off from the pocket.
LUG
12. Install the one latch to the left and right player
brackets.
1 mm
LATCH
LATCH
LEFT PLAYER
BRACKET
PLAYER
POCKET
4 x 8 mm
SELF-TAPPING
SCREW
13. Position the left and right player brackets on the
player and pocket, and install four 5 x 8 mm
washer-screws, and two 4 x 8 mm self-tapping
screws.
6 of 9
LUG
(Cut off.)
POCKET
2529041T
1 mm
LATCH
LATCH
5 x 8 mm
WASHER-
SCREWS (4)
RIGHT PLAYER
BRACKET
4 x 8 mm
2306031T
SELF-TAPPING
SCREW
14. Plug the BUS cable to the player.
Without Navigation System
Cassette Player
•
Make loops in the BUS cable and secure it
with one wire tie, so that the distance between
the ends of the cable connectors are 200 mm.
Plug the BUS cable connector into the
cassette player connector.
BUS CABLE
CONNECTOR
BUS CABLE
WIRE TIE
BUS CABLE
CONNECTOR
MP3 Player
•
Make loops in the BUS cable and secure it
with one wire tie, so that the distance between
the ends of the cable connectors are 200 mm.
Plug the BUS cable connector into the MP3
player connector.
BUS CABLE
CONNECTOR
AII 24379 (0208)
CASSETTE
PLAYER
200 mm
MP3
PLAYER
WIRE TIE
200 mm
BUS CABLE
CONNECTOR
2306061T
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
2306051T
BUS
CABLE